Command

Description

None_c

No command

Cancel_c

Cancels all actions and unselects all selected objects if there are any

Zoom_c

Zooms to display an area specified by two opposite corners of a rectangular window

All_c

Zooms to display all objects of the drawing

Select_c

Enables the select action. So user cad add or remove objects (one object every time) from the selection set, using a small box which replaces the crosshair on the graphics cursor.

Line_c

Creates straight line segments

Polyline_c

Creates polylines

Point_c

Creates Points

Endpoint_c

Snaps to the closest endpoint of a line, polyline, arc etc.

Midpoint_c

Snaps to the midpoint of a line, polyline, arc, etc. or to the center of a circle

Nearest_c

Snaps to the closest point of a line, polyline, arc, etc.

Vertical_c

Snaps to a point perpendicular to a line, polyline, arc, etc.

Intersec_c

Snaps to a intersection of a line, polyline, arc, etc.

Rotate_c

Rotates the selected objects

Mirror_c

Creates a mirror copy of selected drawing objects about a a temporary line given from the user

Scale_c

Enlarges or reduces selected drawing objects by a temporary line given from the user

Move_c

Displaces selected drawing objects a specified distance in a specified direction given from the user by a temporary line

WinSel_c

Selects all drawing objects inside a rectangle defined by two points

Unselect_c

Unselects all selected objects if there are any

Erase_c

Removes all selected objects from the drawing

Undo_c

Reverses the effects of commands. Avax can reverse the last 3000 commands

Redo_c

Reverses the effects of the previous UNDO command

Previous_c

Zooms to display the previous view. You can restore up to 50 previous views

InWinSel_c

Selects all drawing objects completely inside a rectangle defined by two points

SelectAdd_c

Switches to the "Add" selection method in which selected objects can be added to the selection set

SelectSub_c

Switches to the "Sub" selection method in which selected objects can be removed from the selection set

Redraw_c

Refreshes the display of the current viewport

Extends_c

Zooms to display the drawing extents

Copy_c

Duplicates selected drawing objects a specified distance in a specified direction given from the user by a temporary line

Save_c

Saves the current drawing

Exit_c

Teminates the control

Extend_c

Extends a line to meet another line

Fillet_c

Fillets the edges of selected lines

Trim_c

Trims lines at a cutting edge defined by other already selected lines

Break_c

Erases part of already selected line or splits this line in two by a temporary line given from the user

Block_c

Creates a block definition from selected objects

Insert_c

Places a named block or drawing into the current drawing

Ellipse_c

Creates an ellipse

Arc_c

Creates an arc

Text_c

Creates a single line of text

FastText_On_c

Switches to the "FastText" drawing method in which Avax draws the bounding box of a text and not the real text object

FastText_Off_c

Switches off the "FastText" drawing method

Polygon_c

Creates an equilateral closed polyline

Rectangle_c

Creates a rectangular closed polyline

AutoLimits_c

Increses the drawing limits by the AvaxProp.DownLeftFactor_p and AvaxProp.UpRightFactor_p factors

ZoomUndo_On_c

Switches to write zooms in the Undo buffer

ZoomUndo_Off_c

Switches off writing zooms in the Undo buffer

Explode_c

Breaks compound selected objects into their component objects

Pedit_c

Create a polyline by the already selected lines

Node_c

Snaps to a point

Stretch_c

Moves or stretches already selected lines or polylines

Ortho_On_c

Constrains cursor movement to the horizontal or vertical directions

Ortho_Off_c

Switches off the horizontal or vertical cursor movement

Array_c

Creates multiple copies of already selected objects

Offset_c

Creates parallel lines at a specified distance

Set_c

Opens a dialog box in which user can give the pen width, color, layer, etc.

Tangent_c

Snaps to the tangent of a circle and ellipse

Divide_c

Places evenly spaced point objects along the length or perimeter of a selected object

Quadrant_c

Snaps to a quadrant point of a circle and ellipse

Measure_c

Estimates the length of line or polyline

Dxf_In_c

Imports a DXF file in the current drawing

Shell_c

Dos Shell

Save_Load_c

Saves the current drawing and then load it again. This causes regeneration of the drawing and clears the Undo buffer.

Load_c

Loads a drawing

Circle3p_c

Creates a circle by three points given from the user

SelectV_c

Selects vertices to make a temporary polygon

Area_c

Estimates the area of a selected closed polyline or temporary polygon

Calc_Text_c

Unused

LastSv_c

Selects the last temporary polygon

MakeSv_c

Creates a temporary polygon from a polyline object

Dim_c

Creates the dimension of a selected line

Ang_c

Creates the angle of two selected lines

Print_c

Switches to print to printer

NoText_On_c

Switches to the "NoText" drawing method in which Avax does not draw the text objects

NoText_Off_c

Switches off the "NoText" drawing method

CalcExtends_c

Calculates the Extends of the current drawing

Select_All_c

Selects all the drawing objects

Info_c

Unused

Grid_c

Switches the "Grid" to be "on" if it is "off" or "off" if it is "on"

Grid_On_c

Displays a grid (line or dot)

Grid_Off_c

Switches "Grid" off

Snap_c

Restricts cursor movement to specified intervals

Change_Text_c

Changes the selected text

Help_c

Unused

Thaw_c

Thaws the current Layer

Freeze_c

Freezes the current Layer

Change_Layer_c

Changes the selected object's Layer

Change_Color_c

Changes the selected object's Color

Change_Width_c

Changes the selected object's Width

Change_Ltype_c

Changes the selected object's Line type

Change_Ptype_c

Changes the selected object's point type

Change_z_c

Changes the selected object's 3D elevation

Change_h_c

Changes the selected object's 3D height

Dxf_Out_c

Exports the selected objects to a DXF file

Circle_c

Creates a Circle by center and radius

Fasttext_c

Switches to the "FastText" drawing method to be "on" when it is "off" or to be "off" when it is "on"

Ortho_c

Switches "Ortho" to be "on" when it is "off" or to be "off" when it is "on"

SetGrid_c

Sets the distances between the grid lines (or dots)

SetSnap_c

Changes the "Snap" intervals

Wall_c

Creates a wall

UserLimits_c

Sets the drawing limits

Circle2p_c

Creates a Circle based on two endpoints of the diameter

Explode_Block_c

Explodes a Block

File_Label_c

Set a caption to the drawing file

Block_Label_c

Set a caption to the block file

Save_Icon_c

Unused

Insert_Avx_c

Inserts an AVX file in the current drawing

Setup_c

Opens a dialog with the most important "AvaxProp" parameters

Change_Font_c

Changes the selected object's font

Close_c

Draws a line segment from the current position to the starting point of the polyline, creating a closed polyline

Save_As_c

Saves the drawing with another file name

PLT_Out_c

Exports to a PLT file

PIC_Out_c

Exports to a PIC file

BMP_Out_c

Exports to a BMP file

Plane_c

Switches the "Plane" to be "on" if it is "off" or "off" if it is "on"

Plane_On_c

Switches "Plane" on.When "Plane" is on then every new closed polyline or polygon is a plane

Plane_Off_c

Switches "Plane" off

NoWidth_On_c

Ignores the object's width

NoWidth_Off_c

Does not ignore the object's width

Triangle_c

Creates a triangle

APL_Out_c

Exports to a APL file

Resize_c

Unused

CalcBounds_c

Calcs the drawing bounds

RePaint_c

RePaints drawing display

Wall3p_c

Creates a wall from three points

SelectPoints_c

Unused

Cancel_Keep_Select_c

Unused

Zoom_Pan_c

Moves the drawing display in the current viewport

Zoom_Dynamic_c

Zooms to display the generated portion of the drawing with a view box which you can shrink or enlarge

Copy_Win

Copies the selected objects to the Clipboard

Paste_Win

Clipboard Paste

Cut_Win

Erases the selected objects and copies them to the Clipboard

Dwg_In_c

Imports a DWG file

Dwg_Out_c

Exports to a DWG file

Copy_In_c

Creates a new polyline inside a selected closed polyline or a temporary polygon at a specified distance

Copy_Out_c

Creates a new polyline outside a selected closed polyline or a temporary polygon at a specified distance

Border_c

Creates a new polyline to be the border of a selected polyline or a temporary polygon

Centroid_c

Creates a new point in the center of a selected closed polyline or a temporary polygon

Radiate_c

Creates new lines from the center of a selected closed polyline or a temporary polygon to the vertices

CSpline1_c

Creates a CSpline1 from a selected polyline or a temporary polygon

CSpline2_c

Creates a CSpline2 from a selected polyline or a temporary polygon

OBSpline_c

Creates a OBSpline from a selected polyline or a temporary polygon

Bezier_c

Creates a Bezier from a selected polyline or a temporary polygon

CBSpline_c

Creates a CBSpline from a selected polyline or a temporary polygon

Hatch_c

Creates Hatch lines from a selected polyline or a temporary polygon

V_Area_c

Esimates the area of a closed polyline or a temporary polygon

V_Measure_c

Measures the lenght of a line or a polyline

V_Dim_c

Puts the dimension of a selected line or polyline at a specified distance

Roof_c

Unused

Taxis_c

Shorts the selected polyline vertices when they are not continue

P_Break_c

Breaks a selected polyline to lines

VN_Count_c

Adds the counter number for each vertex of a selected polyline or a temporary polygon

VT_Count_c

Adds the alphabetical counter text for each vertex of a selected polyline or a temporary polygon

Area_3V_c

Adds a text with the estamations of triangle area

V_Triangle_c

Creates a triangle

Up_c

Moves drawing display Up

Down_c

Moves drawing display Down

Left_c

Moves drawing display to the Left

Right_c

Moves drawing display to the Right

PgUp_c

Moves drawing display one page Up

PgDn_c

Moves drawing display one page Down

PgLeft_c

Moves drawing display one page to the Left

PgRight_c

Moves drawing display one page to the Right

PgPan_c

Pans drawing display

PgDynamic_c

Zooms dynamic drawing display