Parameter
|
Description
|
Value
|
None_c
|
No command
|
0
|
Cancel_c
|
Cancels all actions and unselects all selected objects if there are any
|
1
|
Zoom_c
|
Zooms to display an area specified by two opposite corners of a rectangular window
|
2
|
All_c
|
Zooms to display all objects of the drawing
|
3
|
Select_c
|
Enables the select action. So user cad add or remove objects (one object every time) from the selection set, using a small box which replaces the crosshair on the graphics cursor.
|
4
|
Line_c
|
Creates straight line segments
|
5
|
Polyline_c
|
Creates polylines
|
6
|
Point_c
|
Creates Points
|
7
|
Endpoint_c
|
Snaps to the closest endpoint of a line, polyline, arc etc.
|
8
|
Midpoint_c
|
Snaps to the midpoint of a line, polyline, arc, etc. or to the center of a circle
|
9
|
Nearest_c
|
Snaps to the closest point of a line, polyline, arc, etc.
|
10
|
Vertical_c
|
Snaps to a point perpendicular to a line, polyline, arc, etc.
|
11
|
Intersec_c
|
Snaps to a intersection of a line, polyline, arc, etc.
|
12
|
Rotate_c
|
Rotates the selected objects
|
13
|
Mirror_c
|
Creates a mirror copy of selected drawing objects about a a temporary line given from the user
|
14
|
Scale_c
|
Enlarges or reduces selected drawing objects by a temporary line given from the user
|
15
|
Move_c
|
Displaces selected drawing objects a specified distance in a specified direction given from the user by a temporary line
|
16
|
WinSel_c
|
Selects all drawing objects inside a rectangle defined by two points
|
21
|
Unselect_c
|
Unselects all selected objects if there are any
|
22
|
Erase_c
|
Removes all selected objects from the drawing
|
23
|
Undo_c
|
Reverses the effects of commands. Avax can reverse the last 3000 commands
|
24
|
Redo_c
|
Reverses the effects of the previous UNDO command
|
25
|
Previous_c
|
Zooms to display the previous view. You can restore up to 50 previous views
|
26
|
InWinSel_c
|
Selects all drawing objects completely inside a rectangle defined by two points
|
27
|
SelectAdd_c
|
Switches to the "Add" selection method in which selected objects can be added to the selection set
|
28
|
SelectSub_c
|
Switches to the "Sub" selection method in which selected objects can be removed from the selection set
|
29
|
Redraw_c
|
Refreshes the display of the current viewport
|
31
|
Extends_c
|
Zooms to display the drawing extents
|
32
|
Copy_c
|
Duplicates selected drawing objects a specified distance in a specified direction given from the user by a temporary line
|
33
|
Save_c
|
Saves the current drawing
|
34
|
Exit_c
|
Teminates the control
|
35
|
Extend_c
|
Extends a line to meet another line
|
36
|
Fillet_c
|
Fillets the edges of selected lines
|
37
|
Trim_c
|
Trims lines at a cutting edge defined by other already selected lines
|
38
|
Break_c
|
Erases part of already selected line or splits this line in two by a temporary line given from the user
|
39
|
Block_c
|
Creates a block definition from selected objects
|
40
|
Insert_c
|
Places a named block or drawing into the current drawing
|
41
|
Ellipse_c
|
Creates an ellipse
|
42
|
Arc_c
|
Creates an arc
|
43
|
Text_c
|
Creates a single line of text
|
44
|
FastText_On_c
|
Switches to the "FastText" drawing method in which Avax draws the bounding box of a text and not the real text object
|
46
|
FastText_Off_c
|
Switches off the "FastText" drawing method
|
47
|
Polygon_c
|
Creates an equilateral closed polyline
|
48
|
Rectangle_c
|
Creates a rectangular closed polyline
|
49
|
AutoLimits_c
|
Increses the drawing limits by the AvaxProp.DownLeftFactor_p and AvaxProp.UpRightFactor_p factors
|
50
|
ZoomUndo_On_c
|
Switches to write zooms in the Undo buffer
|
51
|
ZoomUndo_Off_c
|
Switches off writing zooms in the Undo buffer
|
52
|
Explode_c
|
Breaks compound selected objects into their component objects
|
54
|
Pedit_c
|
Create a polyline by the already selected lines
|
55
|
Node_c
|
Snaps to a point
|
56
|
Stretch_c
|
Moves or stretches already selected lines or polylines
|
57
|
Ortho_On_c
|
Constrains cursor movement to the horizontal or vertical directions
|
58
|
Ortho_Off_c
|
Switches off the horizontal or vertical cursor movement
|
59
|
Array_c
|
Creates multiple copies of already selected objects
|
60
|
Offset_c
|
Creates parallel lines at a specified distance
|
61
|
Set_c
|
Opens a dialog box in which user can give the pen width, color, layer, etc.
|
63
|
Tangent_c
|
Snaps to the tangent of a circle and ellipse
|
64
|
Divide_c
|
Places evenly spaced point objects along the length or perimeter of a selected object
|
65
|
Quadrant_c
|
Snaps to a quadrant point of a circle and ellipse
|
66
|
Measure_c
|
Estimates the length of line or polyline
|
67
|
Dxf_In_c
|
Imports a DXF file in the current drawing
|
68
|
Shell_c
|
Dos Shell
|
69
|
Save_Load_c
|
Saves the current drawing and then load it again. This causes regeneration of the drawing and clears the Undo buffer.
|
70
|
Load_c
|
Loads a drawing
|
71
|
Circle3p_c
|
Creates a circle by three points given from the user
|
72
|
SelectV_c
|
Selects vertices to make a temporary polygon
|
74
|
Area_c
|
Estimates the area of a selected closed polyline or temporary polygon
|
75
|
Calc_Text_c
|
Unused
|
76
|
LastSv_c
|
Selects the last temporary polygon
|
77
|
MakeSv_c
|
Creates a temporary polygon from a polyline object
|
78
|
Dim_c
|
Creates the dimension of a selected line
|
79
|
Ang_c
|
Creates the angle of two selected lines
|
80
|
Print_c
|
Switches to print to printer
|
81
|
NoText_On_c
|
Switches to the "NoText" drawing method in which Avax does not draw the text objects
|
82
|
NoText_Off_c
|
Switches off the "NoText" drawing method
|
83
|
CalcExtends_c
|
Calculates the Extends of the current drawing
|
84
|
Select_All_c
|
Selects all the drawing objects
|
85
|
Info_c
|
Unused
|
86
|
Grid_c
|
Switches the "Grid" to be "on" if it is "off" or "off" if it is "on"
|
87
|
Grid_On_c
|
Displays a grid (line or dot)
|
88
|
Grid_Off_c
|
Switches "Grid" off
|
89
|
Snap_c
|
Restricts cursor movement to specified intervals
|
90
|
Change_Text_c
|
Changes the selected text
|
91
|
Help_c
|
Unused
|
92
|
Thaw_c
|
Thaws the current Layer
|
93
|
Freeze_c
|
Freezes the current Layer
|
94
|
Change_Layer_c
|
Changes the selected object's Layer
|
95
|
Change_Color_c
|
Changes the selected object's Color
|
96
|
Change_Width_c
|
Changes the selected object's Width
|
97
|
Change_Ltype_c
|
Changes the selected object's Line type
|
98
|
Change_Ptype_c
|
Changes the selected object's point type
|
99
|
Change_z_c
|
Changes the selected object's 3D elevation
|
100
|
Change_h_c
|
Changes the selected object's 3D height
|
101
|
Dxf_Out_c
|
Exports the selected objects to a DXF file
|
102
|
Circle_c
|
Creates a Circle by center and radius
|
103
|
Fasttext_c
|
Switches to the "FastText" drawing method to be "on" when it is "off" or to be "off" when it is "on"
|
104
|
Ortho_c
|
Switches "Ortho" to be "on" when it is "off" or to be "off" when it is "on"
|
105
|
SetGrid_c
|
Sets the distances between the grid lines (or dots)
|
106
|
SetSnap_c
|
Changes the "Snap" intervals
|
107
|
Wall_c
|
Creates a wall
|
108
|
UserLimits_c
|
Sets the drawing limits
|
109
|
Circle2p_c
|
Creates a Circle based on two endpoints of the diameter
|
111
|
Explode_Block_c
|
Explodes a Block
|
113
|
File_Label_c
|
Set a caption to the drawing file
|
114
|
Block_Label_c
|
Set a caption to the block file
|
115
|
Save_Icon_c
|
Unused
|
116
|
Insert_Avx_c
|
Inserts an AVX file in the current drawing
|
117
|
Setup_c
|
Opens a dialog with the most important "AvaxProp" parameters
|
118
|
Change_Font_c
|
Changes the selected object's font
|
119
|
Close_c
|
Draws a line segment from the current position to the starting point of the polyline, creating a closed polyline
|
120
|
Save_As_c
|
Saves the drawing with another file name
|
121
|
PLT_Out_c
|
Exports to a PLT file
|
123
|
PIC_Out_c
|
Exports to a PIC file
|
124
|
BMP_Out_c
|
Exports to a BMP file
|
125
|
Plane_c
|
Switches the "Plane" to be "on" if it is "off" or "off" if it is "on"
|
134
|
Plane_On_c
|
Switches "Plane" on.When "Plane" is on then every new closed polyline or polygon is a plane
|
135
|
Plane_Off_c
|
Switches "Plane" off
|
136
|
NoWidth_On_c
|
Ignores the object's width
|
140
|
NoWidth_Off_c
|
Does not ignore the object's width
|
141
|
Triangle_c
|
Creates a triangle
|
142
|
APL_Out_c
|
Exports to a APL file
|
143
|
Resize_c
|
Unused
|
200
|
CalcBounds_c
|
Calcs the drawing bounds
|
201
|
RePaint_c
|
RePaints drawing display
|
205
|
Wall3p_c
|
Creates a wall from three points
|
206
|
SelectPoints_c
|
Unused
|
207
|
Cancel_Keep_Select_c
|
Unused
|
208
|
Zoom_Pan_c
|
Moves the drawing display in the current viewport
|
209
|
Zoom_Dynamic_c
|
Zooms to display the generated portion of the drawing with a view box which you can shrink or enlarge
|
210
|
Copy_Win
|
Copies the selected objects to the Clipboard
|
211
|
Paste_Win
|
Clipboard Paste
|
212
|
Cut_Win
|
Erases the selected objects and copies them to the Clipboard
|
213
|
Dwg_In_c
|
Imports a DWG file
|
214
|
Dwg_Out_c
|
Exports to a DWG file
|
215
|
Copy_In_c
|
Creates a new polyline inside a selected closed polyline or a temporary polygon at a specified distance
|
501
|
Copy_Out_c
|
Creates a new polyline outside a selected closed polyline or a temporary polygon at a specified distance
|
502
|
Border_c
|
Creates a new polyline to be the border of a selected polyline or a temporary polygon
|
503
|
Centroid_c
|
Creates a new point in the center of a selected closed polyline or a temporary polygon
|
504
|
Radiate_c
|
Creates new lines from the center of a selected closed polyline or a temporary polygon to the vertices
|
505
|
CSpline1_c
|
Creates a CSpline1 from a selected polyline or a temporary polygon
|
506
|
CSpline2_c
|
Creates a CSpline2 from a selected polyline or a temporary polygon
|
507
|
OBSpline_c
|
Creates a OBSpline from a selected polyline or a temporary polygon
|
508
|
Bezier_c
|
Creates a Bezier from a selected polyline or a temporary polygon
|
509
|
CBSpline_c
|
Creates a CBSpline from a selected polyline or a temporary polygon
|
510
|
Hatch_c
|
Creates Hatch lines from a selected polyline or a temporary polygon
|
511
|
V_Area_c
|
Esimates the area of a closed polyline or a temporary polygon
|
512
|
V_Measure_c
|
Measures the lenght of a line or a polyline
|
513
|
V_Dim_c
|
Puts the dimension of a selected line or polyline at a specified distance
|
514
|
Roof_c
|
Unused
|
515
|
Taxis_c
|
Shorts the selected polyline vertices when they are not continue
|
516
|
P_Break_c
|
Breaks a selected polyline to lines
|
517
|
VN_Count_c
|
Adds the counter number for each vertex of a selected polyline or a temporary polygon
|
518
|
VT_Count_c
|
Adds the alphabetical counter text for each vertex of a selected polyline or a temporary polygon
|
519
|
Area_3V_c
|
Adds a text with the estamations of triangle area
|
520
|
V_Triangle_c
|
Creates a triangle
|
521
|
Up_c
|
Moves drawing display Up
|
-72
|
Down_c
|
Moves drawing display Down
|
-80
|
Left_c
|
Moves drawing display to the Left
|
-75
|
Right_c
|
Moves drawing display to the Right
|
-77
|
PgUp_c
|
Moves drawing display one page Up
|
-73
|
PgDn_c
|
Moves drawing display one page Down
|
-81
|
PgLeft_c
|
Moves drawing display one page to the Left
|
-115
|
PgRight_c
|
Moves drawing display one page to the Right
|
-116
|
PgPan_c
|
Pans drawing display
|
-117
|
PgDynamic_c
|
Zooms dynamic drawing display
|
-118
|